【美孚】MobilHydraulicAW150价格

• 公司：
  深圳高盛利润滑油有限公司
• 手机：
  13392196659
• 联系人：
  杨小姐女士(销售部经
• 电话：
  0755-29672358
• 地址：
  深圳市福田区

---

品牌:美孚	规格:18L/200L	材质:润滑油
产地:英国

【】美孚润滑油0755-29672358】13392196659谭小姐】15999526096吴杰】

Mobil SHC PM SeriesPaper Machine LubricantsProduct Description

Mobil SHC PM Series products are superior performance synthetic lubricants specifically designed for the most demanding industrial paper machine circulating syst. The Mobil SHC PM Series oils are formulated to provide outstanding protection of gears and bearings operating under the most severe conditions. They have very low pour points and a naturally high viscosity index (VI) which helps ensure good low temperature start-up while maintaining excellent viscosity characteristics at very high temperatures. The fluids are very shear stable and maintain viscosity control even when subjected to severe mechanical shear in heavily loaded bearings and gears. Their low traction coefficient and high viscosity index can help result in lower energy consumption and reduced component operating temperatures.

To develop the latest Mobil SHC technology for Mobil SHC PM Series oils, ExxonMobil product formulation scientists chose select base oils because of their exceptional thermal/oxidative resistance potential and combined them with a balanced additive system, which complement the inherent benefits of the base oils to attain high performance standards. These fluids permit the use of higher steam pressures, temperatures and machine speeds common in high output paper machines and calendar rolls. Their outstanding hydrolytic stability and filterability assure excellent performance in the presence of water and the ability to retain effective filtration even at very fine filtration levels. They readily separate water and retain their colour characteristics for extended periods of operation under severe conditions.

Features and Benefits

The Mobil SHC PM Series oils represent a technological advance in paper machine lubrication. Their excellent performance capabilities in the areas of wear protection, enhanced oxidation stability, chemical stability, effective rust and corrosion protection, colour stability, and filterability not only prolong maintenance service intervals but can improve machine performance and increase production capacity. This can result in less required maintenance and longer equipment life.

FeaturesAdvantages and Potential Benefits

Excellent Wide Temperature Performance	Easier start-up and improved lubrication at cold starts Extra margin of protection at elevated temperatures Better control of feed rates
Exceptional Wear Protection	Improved bearing and gear performance
Outstanding Oxidation and Thermal Stability	Longer oil life Lower filter replacement costs Cleaner syst Reduction of system deposits
Effective Water Separation Properties	Allows easier removal of water Reduces formation of undesirable emulsions in syst
Low Traction Coefficient	Reduced energy consumption Lower operating temperatures Reduced wear
Excellent Filterability	Keeps oil lines and flow control mechanisms free of deposits Improved oil flow and cooling performance Lowers filter replacement costs
High Level Rust and Corrosion Protection	Protects gears and bearings in wet environments Provides vapour space protection for areas of bearing and gear cavities above normally wetted surfaces

ApplicationsLubrication of severe industrial paper machine circulating systApplication involving circulation syst operating over a wide temperature range such as calendar rollsSyst that must be started and brought on line quicklyCirculation syst lubricating gears and bearingsTypical PropertiesMobil SHC PM Series150220320460

ISO Viscosity Grade	150	220	320	460
Viscosity, ASTM D 445
cSt 40o C	158	225	325	465
cSt 100o C	18.9	25.6	34.7	44.8
Viscosity Index, ASTM D 2270, typical	124	127	130	137
FZG 4-Square Load Support, DIN 51354, fail stage	11	11	11	11
Rust Characteristics, Proc A and B, ASTM D 665	Pass	Pass	Pass	Pass
Hydrolytic Stability (Acid Number Change),ASTM D 2619, mgKOH/g	0	0	0	0
Copper Strip Corrosion, 24h 100o C, ASTM D 130, rating	1B	1B	1B	1B
Demulsibility, minutes to 40/40/0, 82o C	15	25	30	30
Pour Point, oC, ASTM D 97, max	-39	-36	-33	-27
Flash Point, oC, ASTM D 92, min	220	220	220	220
Specific Gravity 15o C/15o C, ASTM D 1298	0.857	0.863	0.865	0.874

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS''s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.