PTL灯座试验机 德国PTL灯座试验机 F46.07灯座试验机供应进口灯座试验仪用于检测无电力负荷正常使用下在螺口灯座上的磨损或者有害影响,根据标准IEC 60238 / 1991-01&18 图4和5 , EN 60238 / 1992&18图4和5,DIN VDE 0616第1 / 11.92 18图4和5所示。 Standard outfit: worm drive, with pull tape, with rope pulley of diameter 102mm effectively including rope, with weight carrier, with a device to select E14-, E27- and E40-guide thread, with a shaft stub to fasten the test cap, geared motor, with crank, speed approx. 15 rpm, mounted on the casing, adapter for taking up the specimen, central axis movable and turnable to be in alignment with the longitudinal axis of the test cap,to be secured sturdily by clamping, on a holding trestle, mounted movable on the base support, with a threa- ded rod at the top to support the thrust, base support, approx. 650 mm long, with 2 bearing bases, mounted on the casing, control unit with main switch, push buttons "I" and "O" and predetermining counter, monitoring unit with proximity switch to realize the mechanical limit position of the test cap and with an extra-low voltage power supply to verify the contact making of the specimen, casing, designed as socle for the base support, containing the control unit, protec- tion hood with acrylic glass panes and with a safety switch. Design: casing of sheet steel, papyrus-white structure varnished, protection hood made of aluminum profiles, steel parts browned or nickel-plated, floor space of the casing approx. 700 mm x 380 mm, total height approx. 440 mm with protection hood closed, for operation on top of a table with a height of approx. 800 mm because of the up-and-down motion of the weight pieces, for connection to 230 V 50 Hz, other voltages on request, Article No.: F 46.07 Accessories :Test Cap ,with suitable weight to apply the prescribed screw-in torque,thread: weight: Article No.:E 14 0,8 / 2 kg F 46.36E 27 3 kg F 46.37E 40 6 kg F 46.38
免责声明:以上文字及图片信息由深圳奥德赛创精密仪器有限公司自行提供,内容的真实性、准确性和合法性由发布会员负责,行业信息网对此不承担任何责任。行业信息网不涉及用户间因交易而产生的法律关系及法律纠纷,纠纷由您自行协商解决。
友情提醒:本网站仅作为用户寻找交易对象,就货物和服务的交易进行协商,以及获取各类与贸易相关的服务信息的平台。为避免产生购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量。