N2320-003,Rapidly solidifying standard grade for injection molding.特性:快速凝固的标准级注塑。
N2320-0035, Rapidly solidifying standard grade for injection molding.特性:快速凝固的标准级注塑。
N2320-U017,Ultraform N 2320 U017 UNC Q600 is a rapidly freezing UV stabilized general-purpose injection molding grade.特性:ULTRAFORM N2320 U017 UNC Q600是一个迅速冻结抗紫外线通用注塑级。
N2320-U03,Rapidly freezing UV stabilized general-purpose injection molding grade.特性:快速冻结抗紫外线通用注塑级。
N2520L,This grade has reduced electrical surface resistivity.特性:这个速率减少表面电阻率。
N2520XL2,This grade has low electrical surface resistivity.特性:这个等级具有低表面电阻率。
N2640E2,Elastomer modified injection molding grade with increased toughness and high welding line strength.特性:弹性体改性注塑级增加韧性和高焊缝强度。
N2640E4,Elastomer-modified injection molding grade with high toughness and high weld line strength.特性:具有高韧性和高的焊接线强度弹性体改注塑级。
N2640-Z2, Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also forcomponents subject to impact stress.特性:具有高冲击强度弹性体改注塑级剪辑,卡扣和紧固元件,也可用于组件受到冲击应力。
N2640-Z4, Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also forcomponents subject to impact stress.特性:具有高冲击强度弹性体改注塑级剪辑,卡扣和紧固元件,也可用于组件受到冲击应力。
N2640-Z6,Elastomer-modified injection molding grade for applications requiring highest impact strength together with low stiffness.特性:在需要最高冲击强度低刚度以及应用弹性体改性注塑级。
N2644-Z9,Elastomer modified injection molding grade for applications requiring low modulus. Good acoustic damping.特性:弹性体改性注塑级,适用于需要低模量的应用。良好的声学阻尼。
N2720-M210,10%Grade with enhanced stiffness and strength as well as good wear properties, e.g. used for conveyor belts and transportation syst.特性:10%的增强的刚度和强度,以及如良好的耐磨特性,用于传送带和运输系统。
N2720-M63,30%Mineral-reinforced material for low-warpage moldings with high stiffness, strength and hardness.特性:30%矿物增强材料用于低翘曲角线具有高刚度,强度和硬度。
N2770K,Injection molding grade with enhanced wear behavior for sliding parts.特性:与滑动部件增强磨损性能注塑级。
S1320-0021, Ultraform S 1320 0021 UNC is an easy flowing, rapidly freezing injection molding POM grade withenhanced stiffness and heat distortion resistance. It is highly stabilized to resist aggressive fuels,including hot diesel fuel.特性:ULTRAFORM S13200021 UNC是一种简单的流动,迅速冻结注塑POM具有增强刚性和耐热变形性等级。它是高度稳定化以抵抗侵蚀性燃料,包括热柴油燃料。
S1320-003, Free-flowing, rapidly solidifying grade for moldings difficult to produce by injection molding and having low wall thickness;increased stiffness and heat distortion esistance.特性:自由流动的,快速凝固的等级为模制品很难生产通过注射成型,并具有低的壁厚;增加的刚度和耐热变形性。
S2320-003, Easy flowing and rapidly freezing grade for injection molding difficult, thin-walled parts特性:易流动的并迅速冷冻级注塑困难,薄壁零件
W2320-003,Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower.特性:非常自由地流动,迅速凝固级,用于处理时的使用是极其困难的,但机械性能都低。
W2320-0035,Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower.特性:非常自由地流动,迅速凝固级,用于处理时的使用是极其困难的,但机械性能都低。
W2320-U03, Very free-flowing, rapidly solidifying grade with UV stabilisation for use where processing is extremely difficult butmechanical requirements are lower.特性:非常自由地流动,快速凝固的品位,用紫外稳定使用,其中处理是非常困难的,但机械性能要求较低。
Z2320-003.Extremely easy flowing grade for very thin-walled moldings with difficult flow path to wall thickness ratios and very short cycle times.特性:非常容易流动等级为极薄壁成型品棘手流路壁厚比和很短的周期时间。
免责声明:以上文字及图片信息由苏州冠腾塑胶贸易有限公司自行提供,内容的真实性、准确性和合法性由发布会员负责,行业信息网对此不承担任何责任。行业信息网不涉及用户间因交易而产生的法律关系及法律纠纷,纠纷由您自行协商解决。
友情提醒:本网站仅作为用户寻找交易对象,就货物和服务的交易进行协商,以及获取各类与贸易相关的服务信息的平台。为避免产生购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量。