10Gb/s BIDI SFP+ 40km Transceiver
Product Features
l Up to 11.1Gbps Data Links
l Up to 40km transmission on SMF
l Power dissipation<1.5W
l 1270nm DFB laser and PIN receiver for HTFPPB-273396-40D
l 1330nm DFB laser and PIN receiver for HTFPPB-332796-40D
l 2-wire interface with integrated Digital Diagnostic monitoring
l EEPROM with Serial ID Functionality
l Hot-pluggable SFP+ footprint
l Compliant with SFP+ MSA with LC connector
l Single + 3.3V Power Supply
l Case operating temperature: 0oC~+70oC
Applications
l 10GBASE-BX
Standard
l Compliant with SFF-8472
l Compliant to SFF-8431
l Compliant to 802.3ae 10GBASE-ER/EW
l RoHS Compliant.
Absolute Maximum Ratings
HTFPPB-XXYY96-40BD is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 11.1Gb/s,it designed to be compliant with SFF-8472 SFP+ MSA. The module data link up to 40km in 9/125um single mode fiber.
Absolute Maximum Ratings
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Storage Temperature | Ts | -40 | - | 85 | oC | |
Storage Ambient Humidity | HA | 5 | - | 95 | % | |
Operating Relative Humidity | RH | - | - | 85 | % | |
Power Supply Voltage | VCC | -0.3 | - | 4 | V | |
Signal Input Voltage | Vcc-0.3 | - | Vcc+0.3 | V |
Recommended Operating Conditions
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Case Operating Temperature | Tcase | 0 | - | 70 | oC | Without air flow |
Power Supply Voltage | VCC | 3.14 | 3.3 | 3.47 | V | |
Power Supply Current | ICC | - | 450 | mA | ||
Data Rate | BR | 10.3125 | Gbps | |||
Transmission Distance | TD | - | 40 | km | ||
Coupled fiber | Single mode fiber | 9/125um SMF | ||||
Optical Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Transmitter | ||||||
Average Launched Power | Pout | 0 | - | 5 | dBm | |
Average Launched Power(Laser Off) | Poff | - | - | -30 | dBm | Note 1 |
Center Wavelength Range | λC | 1260 | 1270 | 1280 | nm | HTFPPB-XXYY96-40BD |
1320 | 1330 | 1340 | nm | HTFPPB-XXYY96-40BD | ||
Side mode suppression ratio | SMSR | 30 | - | - | dB | |
Spectrum Bandwidth(-20dB) | σ | - | - | 1 | nm | |
Extinction Ratio | ER | 3.5 | - | dB | Note 2 | |
Output Eye Mask | Compliant with IEEE 802.3ae | Note 2 | ||||
Receiver | ||||||
Input Optical Wavelength | λIN | 1320 | 1330 | 1340 | nm | HTFPPB-XXYY96-40BD |
1260 | 1270 | 1280 | nm | HTFPPB-XXYY96-40BD | ||
Receiver Sensitivity | Psen | - | - | -15 | dBm | Note 3 |
Input Saturation Power (Overload) | PSAT | 0.5 | - | - | dBm | Note 3 |
LOS -Assert Power | PA | -30 | - | - | dBm | |
LOS -Deassert Power | PD | - | - | -17 | dBm | |
LOS -Hysteresis | PHys | 0.5 | - | 5 | dB | |
Note:
1. The optical power is launched into SMF
2. Measured with RPBS 2^31-1 test pattern 10.3125Gbs
3. Measured with RPBS 2^31-1 test pattern 10.3125Gbs BER=<10^-12
Electrical Interface Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
Total power supply current | Icc | - | 450 | mA | ||
Transmitter | ||||||
Differential Data Input Voltage | VDT | 180 | - | 700 | mVp-p | |
Differential line input Impedance | RIN | 85 | 100 | 115 | Ohm | |
Transmitter Fault Output-High | VFaultH | 2.4 | - | Vcc | V | |
Transmitter Fault Output-Low | VFaultL | -0.3 | - | 0.8 | V | |
Transmitter Disable Voltage- High | VDisH | 2 | - | Vcc+0.3 | V | |
Transmitter Disable Voltage- low | VDisL | -0.3 | - | 0.8 | V | |
Receiver | ||||||
Differential Data Output Voltage | VDR | 300 | - | 850 | mVp-p | |
Differential line Output Impedance | ROUT | 80 | 100 | 120 | Ohm | |
Receiver LOS Pull up Resistor | RLOS | 4.7 | - | 10 | KOhm | |
Data Output Rise/Fall time | tr/tf | - | 38 | ps | ||
LOS Output Voltage-High | VLOSH | 2 | - | Vcc | V | |
LOS Output Voltage-Low | VLOSL | -0.3 | - | 0.4 | V | |
Pin Description
Diagram of Host Board Connector Block Pin Numbers and Name
Pin | Symbol | Name/Description | Note |
1 | VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
2 | TFAULT | Transmitter Fault. | 2 |
3 | TDIS | Transmitter Disable. Laser output disabled on high or open. | 3 |
4 | SDA | 2-wire Serial Interface Data Line | 4 |
5 | SCL | 2-wire Serial Interface Clock Line | 4 |
6 | MOD_ABS | Module Absent. Grounded within the module | 4 |
7 | RS0 | Rate Select 0 | 5 |
8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation. | 6 |
9 | RS1 | No connection required | 1 |
10 | VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
11 | VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
12 | RD- | Receiver Inverted DATA out. AC Coupled | |
13 | RD+ | Receiver Non-inverted DATA out. AC Coupled | |
14 | VEER | Receiver Ground (Common with Transmitter Ground) | 1 |
15 | VCCR | Receiver Power Supply | |
16 | VCCT | Transmitter Power Supply | |
17 | VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
19 | TD- | Transmitter Inverted DATA in. AC Coupled. | |
20 | VEET | Transmitter Ground (Common with Receiver Ground) | 1 |
免责声明：以上文字及图片信息由深圳恒通未来科技有限公司自行提供，内容的真实性、准确性和合法性由发布会员负责，行业信息网对此不承担任何责任。行业信息网不涉及用户间因交易而产生的法律关系及法律纠纷，纠纷由您自行协商解决。
友情提醒：本网站仅作为用户寻找交易对象，就货物和服务的交易进行协商，以及获取各类与贸易相关的服务信息的平台。为避免产生购买风险，建议您在购买相关产品前务必确认供应商资质及产品质量。
