进口高压法兰电磁阀(进口高压电磁阀0品牌

• 电磁阀:
  进口高压法兰电磁阀（品…
• 品牌：
  德国雷普
• 通径:
  1-300mm
• 接口：
  3-300mm
• 温度:
  -40-650

• 公司：
  深圳派克阀门有限公司
• 手机：
  13827443669
• 联系人：
  林工
• 电话：
  0755-81708778
• 地址：
  深圳龙华新区墩背工业区

进口高压法兰电磁阀

德国雷普电磁阀总代理:深圳派克阀门有限公司

Germany LIP Solenoid Valve  distributor: Shenzhen Parker Valve Co.

交货准时:先进生产流水线,充足的备货,缩短了交货期!

雷普电磁阀产品有:进口法兰高压电磁阀,进口高压法兰电磁阀,进口超高压电磁阀,进口耐高压法兰电磁阀

进口法兰高压电磁阀、德国雷普LIP品牌

一、应用范围    Applications

    它广泛应用在航天、船舶重工、石油化工、工业炉窑、锅炉、给排水、采暖空调、消防设备、干燥设备

食品医疗设备、清洗设备、景观灌溉、喷泉、水厂等管道系统中.

    It is widely used in aerospace, shipbuilding Heavy Industry, petrochemical, industrial furnaces,

boilers, plumbing, heating and air conditioning, fire-fighting equipment, drying equipment,Food medical

equipment, cleaning equipment, landscape irrigation, fountains, water and other piping syst

二、产品特点    Features

△不锈钢活塞式,动作灵敏,寿命长达100万次;专制线圈不易烧毁;阀安装方向无限制;适用范围广

△Stainless steel piston, movement sensitive, life is 100 million times; autocratic coil   easily burned;

valve installed on the direction of unrestricted; for a wide range of

三、工作原理    Work

△常闭型:线圈通电时,主阀芯靠介质压差力打开;线圈断电,阀关闭。

△常开型:线圈通电时,阀关闭;线圈断电,主阀芯靠介质压差力打开。

△ Normally closed type: coil power, the main valve to

   open by medium pressure force; coil power, valve closed 

△Normally open type: coil power, the valve closed; coil power,

   pressure forces the main valve opens by media                                                                 
备注:当出口端压力大于进口端压力,介质回反向导通。

可安装止回阀或订制带止回功能的阀。

When the exit pressure is greater than the inlet pressure, medium

Back to pass against the wizard.

Check valve can be installed or ordered withnon-return valve function

四、法兰型规格尺寸   Flange type Size

五、主要技术参数  Main technical parameters

△产品型号   Product Type:             

△动作方式:直动式、分步直动式、先导式。

△Action by: direct-acting type, direct-action step, Pilot.

△阀体材质:铸钢体、不锈钢。(铸钢体不能用在腐蚀流体上)                

△Body material: cast steel body, stainless steel. (Steel body can not be used in corrosive fluid on) 

△控制方式:常开、常闭、自保式。

△Control mode: Normally open, NC, self-protection type.                                               

△适用介质:水、气、油、蒸汽、燃气、腐蚀流体

△ Suitable medium: water, gas, oil, steam, gas, corrosive fluid                                                                                                  
△工作温度     Operating temperature:                                                

-200℃~0℃;-60℃~+100℃;-20℃~+80℃;-20℃~+150℃;0℃~+200℃;0℃~+350℃.

△防护性能:防水、防爆(Exd IICT5)、防腐。

△ Protection performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion                                              
△工作电压    Operating Voltage:                                                                                               
DC12V、DC24V、DC36V、DC110V、DC127V、DC220V;AC36V、AC110V、AC220V、AC380V

△接线方式:接线座式、引线式、插座式。                                                  

△Wiring: Wiring Block type , lead type , socket

△附加功能:带信号反馈、带手动控制、带止回功能

△Additional features: with signal feedback, with manual control, with a return function

进口高压法兰电磁阀根据流体参数选电磁阀的材质:

1、腐蚀性流体:宜选用耐腐蚀电磁阀和全不锈钢;食用超净流体:宜选用食品级不锈钢材质电磁阀。 

2、高温流体:要选择采用耐高温的电工材料和密封材料制造的电磁阀,而且要选择活塞式结构类型的。 

3、流体状态:大至有气态,液态或混合状态,特别是口径大于DN25订货时一定要区分开来。 

4、流体粘度:通常在50cSt以下可任意选择,若超过此值,则要选用高粘度电磁阀。 

电磁阀是用电磁阀的效应进行控制,主要的控制方式由继电器控制。这样电磁阀可以配合不同电路来实现预期的控制,

品牌:德国雷普(LIP)

质保期:1年